installation of <M-surge/E-surge-U-care in >WIndows 7

announcements (new versions, changes, bugs, installation problems...) related to M-SURGE, E-SURGE and U-CARE

installation of <M-surge/E-surge-U-care in >WIndows 7

Postby ebelda » Wed Nov 17, 2010 12:18 pm

Does anybody know how to install any of these in Windows 7. I have tried to install them but unsuccesfully: I have already used them in Windows XP. I have followed the instructions and steps recommended: I installed the matlab libraires and then those programms

Thanks for any help
ebelda
 
Posts: 6
Joined: Thu Sep 09, 2010 11:23 am

Re: installation of <M-surge/E-surge-U-care in >WIndows 7

Postby CHOQUET » Mon Nov 22, 2010 10:11 am

A reply to this problem was already posted.
Under Vista and Seven, the first execution of the program should be done
using the "run as an administrator" option. It appears that in this
new system, an administrator is not really an administrator.
Many thanks to Microsoft,
Rémi
CHOQUET
 
Posts: 211
Joined: Thu Nov 24, 2005 4:58 am
Location: CEFE, Montpellier, FRANCE.

Re: installation of <M-surge/E-surge-U-care in >WIndows 7

Postby ebelda » Mon Dec 06, 2010 4:16 am

ok thanks, I manage to install them and they do work. The problem was with the "regional options". A dot must be used for decimals
ebelda
 
Posts: 6
Joined: Thu Sep 09, 2010 11:23 am

Re: installation of <M-surge/E-surge-U-care in >WIndows 7

Postby lucette » Wed Jun 01, 2011 5:59 am

G'day,
I have windows 7 and i need to install E-Surge for my work. I have followed the instructions, first matlab library and then E-surge using each time "..as administrator" but it's still not working....??? have you got an idea why ? and how i can fix this?

Thanks,

Cheers
lucette
 
Posts: 5
Joined: Mon May 23, 2011 6:04 am

Re: installation of <M-surge/E-surge-U-care in >WIndows 7

Postby lucette » Mon Jun 06, 2011 3:17 am

G'day,
It's okay i've solved my problem to install E-SURGE on Windows 7 but now i have an other problem when i run E-surge after the black windows and before the E-surge windows i have an error message, and this message appears again when I want set de GEPTA model.

Error using -> actxcontrol
Control creation failed. invalid ProgID 'VSFLEX.vsFlexArrayCtrl.1'


so I can do nothing. Does someone know this problems? and i can fix it?

Cheers,
lucette
 
Posts: 5
Joined: Mon May 23, 2011 6:04 am

Re: installation of <M-surge/E-surge-U-care in >WIndows 7

Postby CHOQUET » Wed Jun 08, 2011 4:27 am

The first time, execute E-SURGE as a administrator but not from the desktop(windows does not allow it),
but rather from the control panel.
Rémi
CHOQUET
 
Posts: 211
Joined: Thu Nov 24, 2005 4:58 am
Location: CEFE, Montpellier, FRANCE.

Re: installation of <M-surge/E-surge-U-care in >WIndows 7

Postby lucette » Mon Jun 13, 2011 2:43 am

Thank you for your help.I tried your solution but it didn't work. i have still the same error message:
Error using ==> actxcontrol
control creation failed. invalid ProgID 'VSFLEX.vsFlexArrayCtrl.1'


....?

Cheers,

lucie
lucette
 
Posts: 5
Joined: Mon May 23, 2011 6:04 am

Re: installation of <M-surge/E-surge-U-care in >WIndows 7

Postby CHOQUET » Tue Jun 14, 2011 5:43 am

Hello,
I don't know what happens.
There is two options :
1) either you are not an administrator of your computer
2) either you didn't select 'run as a administrator' (right click of the mouse).
otherwise I don't know.
Sincerely,
Rémi
CHOQUET
 
Posts: 211
Joined: Thu Nov 24, 2005 4:58 am
Location: CEFE, Montpellier, FRANCE.


Return to software problems/news

Who is online

Users browsing this forum: No registered users and 7 guests

cron